- The RVC-9025 Rotational Voice Coil Stage provides a means to quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution.
The Mirror: The mirror is an integral part of the RVC-9025 and is usually specified at time of order. The mirror and its associated inertia will largely predict the overall step and settle time of the actuator. With that in mind the user should careful consider parameters surrounding the mirror including its shape and flatness. The mirror should be no wider than absolutely necessary and sufficiently long to accommodate the beam elongation as a consequence of the tilting process. Mirror flatness will largely dictate its thickness and overall inertia. In special cases, mirror thickness and its affects on inertia can be managed using costlier materials such as beryllium that have a higher specific stiffness. As the mirror thickness grows, its front surface will proportionally move further off the rotational axis which in some cases can be undesirable. Other parameters including coating and scratch/dig need to be included to fully describe the mirror. While a mirror is probably the most common payload other customer supplied or specified loads can be used such as gratings.
Position Sensor: The RVC-9025 is able to position its mirror with a resolution of 25 micro-radians in a large part because of the high-resolution sensor it uses. The analog nature of its non-contact sensor also makes it noise limited by adjusting its bandwidth. Careful control and optimization of the sensor signal permits the servo to operate at a higher bandwidth and thereby having a higher stiffness and exceptionally low positioning wander or hysteresis.
Voice Coil Motor: The RVC-9025 includes a high efficiency voice coil motor--somtimes referred to as a single phase DC motor. The motor coil is directly coupled to the mirror support beam and position sensor. That tight and rigid coupling of the load, actuator and sensor assures exceptional position repeatability and step-and-settle times. The high efficency of the motor coil yields a small and light-weight coil that adds little of the overall motion inertia.
Integrated Elecgtronics:The RVC-9025 includes a highly miniaturized servo amplifier and controller. The mirror position can be controlled through either the USB and its 16-bit DAC or an analog input signal. At the same time mirror position can be monitored from and analog output or the USB and an optional 16-bit ADC. The auxillary input header also provides a means to enable the amplfier and monitor it for faults. Thereby supporting a configuration for a deeply embeded and autonomous device.
RVC-9025 Rotational Voice Coil Stage Brochure provides a brief presentation of the products features and specifications.
RVC-9025 Rotational Voice Coil Stage Mechanical Interface Drawings presents the mechanical details necessary for integration of the product.
Voice Coil Stage Interfacing and User Manual deatils installation, operation and maintenance of the product.
SCA615 Servo Controlled Amplifier USB Device Driver provides a means to easily communicate with the controller using your Microsoft Windows 7 system and terminal program such as HyperTerminal.
SCA615 Servo Controlled Amplifier Manual provides detailed documentation on interfacing to and use including complete command descriptions.
In order to read a PDF file, you must have Adobe Acrobat reader installed on your computer. You can download the latest version at the Adobe website. In order to read DjVu files, you must have the DjVu viewer installed on your computer. Click this banner and install the viewer. In order to read AutoCAD or SolidWorks files, you must have the eDrawings viewer installed on your computer. Click this banner and install the viewer.